We supply plate from 6 to 200 mm thick in carbon, low-alloy, chrome-molybdenum, 9 % nickel, high-strength and abrasion-resistant grades — cut to size, heat treated to specification, and certified to EN 10204 3.1 or 3.2.
Buyers in Europe specify EN 10028 and EN 10025; buyers in North America specify ASME and ASTM. Our catalogue is organised the same way, so you can go straight to the grade that appears on your drawing.
Boiler and pressure-vessel quality plate for shells, heads and storage tanks, supplied with EN 10204 3.1 or 3.2 certification and o…
Low-temperature plate from 3.5 % nickel through 9 % nickel, impact-tested down to −196 °C for LNG, ethylene and air-separation serv…
General structural plate in as-rolled, normalized and TMCP conditions, with optional Z-direction quality to EN 10164 for welded joi…
Quenched-and-tempered and TMCP plate from 460 MPa up to 1100 MPa yield strength for weight-critical structures.
Hull-structure plate in normal and higher-strength grades with class-society approval for ABS, DNV, LR, BV, NK, CCS and KR.
Offshore-grade plate with tight chemistry control for toughness, weldability and through-thickness performance in fixed and mobile …
TMCP and normalized linepipe plate for LSAW and HSAW pipe mills, in PSL1 and PSL2 with sour-service options.
Bridge-quality and weathering plate for orthotropic decks, main girders and arch ribs, including fracture-critical and unpainted we…
reactor and column shells, heat-exchanger shells, boiler and steam drums, LPG and ammonia storage spheres, and hydrotreater v…
Datasheet, chemistry & properties →reactor and column shells, heat-exchanger shells, boiler and steam drums, LPG and ammonia storage spheres, and hydrotreater v…
Datasheet, chemistry & properties →industrial and commercial building structures, crane booms, machine frames, and general welded fabrication
Datasheet, chemistry & properties →reactor and column shells, heat-exchanger shells, boiler and steam drums, LPG and ammonia storage spheres, and hydrotreater v…
Datasheet, chemistry & properties →LSAW and HSAW linepipe for oil and gas transmission, high-pressure trunk lines, sour-service flowlines, and pipe fittings and…
Datasheet, chemistry & properties →industrial and commercial building structures, crane booms, machine frames, and general welded fabrication
Datasheet, chemistry & properties →Every export order is documented so that your receiving inspection, notified body and end customer can all be satisfied from the same package.
EN 10204 3.1 as standard, 3.2 on request with a notified body witness, traceable to heat number and plate ID.
UT to EN 10160 class S1–S3 or ASTM A578 Level I–III, with the acceptance level agreed before rolling.
HIC to NACE TM0284 and SSC to NACE TM0177 for wet H2S, with crack-length ratio and CLR reported.
SGS, Bureau Veritas, TÜV or Intertek attendance at production and at loading, on your instruction.
Send the grade or the standard you specify, the thickness range, quantity and destination port. We reply with price, lead time, delivery term and the applicable certificate within 12 hours (Mon–Sat, GMT+8).
